motorola

Focused Discussion => Motorola GM Series Discussion Board => Topic started by: percyhornickel on August 07, 2019, 05:05:16 PM



Title: GM300 REPEATER - NO RICK - JUST CABLES
Post by: percyhornickel on August 07, 2019, 05:05:16 PM
Hi, Im trying to make a repeater with two GM300 (VHF) and I have a question about the configuration.

It is fine to program/configurate the RADIOS like this?:

MENU        RADIO WIDE CONFIGURATION
SUB MENU ACCESORY INFORMATION
OPTION     ACC. EXTERNAL.............................Radius RICK Rx (For Radio Rx) / Radius RICK Tx (For Radio Tx)

Should I put this in ACC. EXTERNAL?

Should I change radios to a REPEATER MODE in th codeplug configuration?

Im using just short cables to connect the external pins like this:

RX                                 TX
PIN 7 (GND)               PIN 7 (GND)
PIN 11 (AUDIO RX)      PIN 2 (AUDIO TX)
PIN 8 (CSQ O COR)      PIN 3 (PTT)

I hope somebody could help me with this please, thank you.