motorola

Motorola Repair & Parts Service => Motorola Repair Service => Topic started by: Dave on April 16, 2009, 04:21:39 PM



Title: ** List of Repair Services Available to Members **
Post by: Dave on April 16, 2009, 04:21:39 PM
We are able to provide the below service to all members of the forum

1. Programming of  GP / GM Series Radios * upto 32 Channels
2. Flash Upgrade of GP / GM Series Radios

If the service you require is not listed, please contact us.


Title: Re: ** List of Repair Services Available to Members **
Post by: poseidon on October 10, 2009, 09:27:02 PM
I am a member
Please can you quote to flash upgrade two Motorola GP388 and programme frequency for my licence.
I bought these 2nd hand and they have contacts names e.g. security, gatehouse etc that I would like to remove and create my own.
Regards


Title: Re: ** List of Repair Services Available to Members **
Post by: Dave on October 11, 2009, 08:11:23 PM
Hi the cost would be 60.00 inc return postage.


Title: Re: ** List of Repair Services Available to Members **
Post by: dK on January 19, 2011, 11:26:25 PM
General description of 3 problems:
I wish to send in for repair: Please advise/comment/guestimate/suggest
1 x motorola GP340 UHF>radio not powering up. DC up to and out of on off pot. Not able to take repair further.
1 x motorola GP340 UHF> noisey audio on receiving radios when this radio is in transmit. Using BNC test adaptor audio cleans up..... Dont know if RF jack is simply droping the power down or if unit has a faulty aerial socket assembly>unable to take repair further.
1 x motorola GM360 UHF> Radio has code plug error on display. Do not service/supply this model. Do not have programing lead or software. Radio was with customer for well over 1 year supplied by another Co before error occurred. Customer has replacement now. If radio is repaired it will also need re-programming to other frequency.

Please advise on return postage costs for above.
(Based in Southern Ireland)

I understand no guarantees but are fault descriptions farmiliar???

dK


Title: Re: ** List of Repair Services Available to Members **
Post by: Rob on January 29, 2011, 05:10:14 PM
I've informed mike@protea-electronics.co.uk of this repair request


Title: Re: ** List of Repair Services Available to Members **
Post by: adds11 on May 20, 2011, 08:25:56 AM
I need to get 2 * GM 900 programmed for the use of my local Search and Rescue unit as a repeater they are currently in a GR 900 housing with correct connections. I have GM 900 software but for some reason it will not write back to the radio only reads the codeplugs, any suggestions, help or offers of programming greatly received.
How much is this likely to cost?


Title: Re: ** List of Repair Services Available to Members **
Post by: emsgeorge on May 20, 2011, 06:54:51 PM
Are you programming it with a very slow computer - it needs a veeeeery slow computer, running dos - proper dos !


Title: Re: ** List of Repair Services Available to Members **
Post by: adds11 on May 21, 2011, 11:08:22 AM
Yes using, slow computer running windows 98, booting straight into dos - not windows DOS, using A DOS boot disc. This computer usually managess to programme my other GP300's, GM 350's and GM 360


Title: Re: ** List of Repair Services Available to Members **
Post by: radiobup on May 21, 2011, 07:50:54 PM
Hi,

The GM900 Series does not require very slow computer, just need to boot to DOS.
Sometimes, radio have trouble to program via RJ45, use the accessory connector instead of control head.

There is an old dos RSS : MR900 PC6915 , used for GM900 repeater, but if I remember correctly, you do not need specific RSS for GR900



Title: Re: ** List of Repair Services Available to Members **
Post by: adds11 on May 22, 2011, 08:10:09 AM
Does anybody know where I can get the accessory connector programming lead from?
OR
Is there anybody that could programme these radios for me? How much would this cost?


Title: Re: ** List of Repair Services Available to Members **
Post by: lumenshine on February 21, 2012, 09:37:00 AM
I am a completely new to Motorola technology, but I have recently bought 6 Motorola GP 340 walkie talkies second hand, and cannot get them to work. When I try band 1, I cannot get any connection, and when I try any other band, I get a constant tone. Does anyone know if they they need reprogramming or repair?
many Thanks


Title: Re: ** List of Repair Services Available to Members **
Post by: Travis on July 31, 2012, 10:53:19 AM
Dave-I have a "Chinese" GP380 that has several problems.
                  1. When first received, the  RX sensitivity was poor, and still is.
                  2. After about a month, the unit, when turned on, would cycle on and off repeatedly, never getting past the boot screen.
                  3. Now the unit will not turn on
Could you please advice me as to whether you would/could possibly be able to help with this

Thank you-Travis


Title: Re: ** List of Repair Services Available to Members **
Post by: MIKIE36 on January 21, 2013, 03:46:23 AM
i have a gp380 uhf it says codeplug error how much to fix


Title: Re: ** List of Repair Services Available to Members **
Post by: Cliveag on June 30, 2013, 11:41:27 PM
Any idea of a local dealer who could upgrade the firmware on my GP380 details as follows
As when i tried to update codeplug it tells me firmware needs upgrading
Radio Model Number   H25KDH9AN6
Codeplug Version   3.0
Codeplug Partnumber   8264932B67
Radio Software Version    R02.00.18
Freq Range Mhz      136-174
Radio Power Watts   1-5
Option Board Data   Not Loaded
Description          Portable, with Keypad, With Standars Display



Title: Re: ** List of Repair Services Available to Members **
Post by: burnshte on May 11, 2015, 05:36:16 PM
Could you give me a price to flash a gp680 thanks antony


Title: Re: ** List of Repair Services Available to Members **
Post by: Gipper on July 07, 2015, 06:44:53 PM
Hi
Looking for a price to get 1 GP340 programmed with a channel please.


Title: Re: ** List of Repair Services Available to Members **
Post by: M6SSO on May 31, 2016, 02:15:34 PM
Could I have a price to fix a EEPROM checksum error on a gm1280 please


Title: Re: ** List of Repair Services Available to Members **
Post by: Andrew GM0UDL on May 26, 2019, 08:32:19 AM
Hello all
Looking at getting my GM340 firmware updated to 8.1.
What would be the procedure
Thanks
Andrew