Sending data with GM360

February 07, 2012, 03:19:50 pm

Welcome, Guest. Please login or register.
Did you miss your activation email?

News:

Home

Help

Contact Admin Team

Radio Services

Supply Radios, Spare Parts, Programming Cables, Flash Adapters

Members area provides radio programming videos

If we have helped you, please make a donation, however small. This helps us develop the site and offer better services.

Advert

motorola > Focused Discussion > Motorola GM Series Discussion Board (Moderators: admin, Rob) > Sending data with GM360

Pages: [1] Go Down

« previous next »

	Author	Topic: Sending data with GM360 (Read 1162 times)
0 Members and 1 Guest are viewing this topic.

Mo-To

Subscriber

FeedBack +0/-0
Offline

Offline

Posts: 26

Sending data with GM360

« on: May 12, 2010, 05:57:23 pm »

Hi,

I've just upgraded my trusty GM300 to a GM360, I send Pocsag data through my GM300 via the 16pin connector, when I connect the 16pin connector to my GM360 and use my Pocsag Encoding software the radio transmits fine but there is no data being sent, its just a silent transmission, I've tried hook up my GM300 again and it works fine, any ideas?

Nick


	Logged

Mo-To

Subscriber

FeedBack +0/-0
Offline

Offline

Posts: 26

Re: Sending data with GM360

« Reply #1 on: May 13, 2010, 04:39:24 am »

For anyone else who may have the same problem here's how I solved it, using the CPS pin 3 needs to be set to PTT Data, this seems to allow the audio from pin 5 to be transmitted. Now have a nice Pocsag Transmitter.

Nick


	Logged

ghondie

Subscriber

FeedBack +0/-0
Offline

Offline

Posts: 5

Re: Sending data with GM360

« Reply #2 on: July 16, 2010, 02:47:51 pm »

im pretty sure there is a setting that can make the radio respond quicker for data modes and will be in the gp i/o settings page?


	Logged

Pages: [1] Go Up

« previous next »

Jump to:

Page created in 0.041 seconds with 22 queries.

Google visited last this page January 21, 2012, 04:51:51 pm