Making an repeater out of 2 gm3x0 radio's

[m.meiberg]

Looking for some help.
In the attached pdf file you can see information on how to make an repeater out of 2 waris gm radios; but it is written for cdm radios, but I can't find the right settings to make it work with 2 gm360's.
Some how can tell me what settings I have to make to have this working??

Thanks!

[emsgeorge]

I have a friend who has exactly the set up you are looking for - 2 x gm380's and a cheap chinese connector cable between the 2.

I will give him a shout later, and get him to download the codeplugs for me.

Send me an email address and I will ping them over to you.

[janssen-tts]

hi george,

i was looking to do the same thing with 2 gm380's or 2 gm360's.

do you maybe have a codeplug for this set up or a guide of somekind?

thanx in advance
stephan

[emsgeorge]

I have a friend who has done it with 2 x gm380's- but im yet to extract the codeplugs out of him, to take a look.

I do know that his kit is a simple chinese link kit, rather than the full 'rick' kit - which needs different settings.

Hes also upgraded to win 7, and so is having the same 'issues' as I am !

Hopefully be in the next week or so.

[janssen-tts]

why oh why would you want to update you progamming computer?

i found it a big step to buy an overstock hp nc6000 when my win98 laptop died some of the programs i use just won't work reliable now i have a pc mounted in the car running win98 (not ideal).

hope you get it running.

greetz

[nightmare6667]

all you need to make a repeater is 2x gm accessorie connectors

tx radio gpio lines
pin 3 voice ptt
pin 2 tx audio
pin 7 ground
pin 10 ignition scence

rx radio

pin 8 car sterio mute if you want a 5 second hang time or pl/dpl detect if you dont, this connects to pin 3 of tx
pin 7 ground to pin 7 of tx
pin 11 accessorie connector audio make sure this is set to filterd squelched, to pin 2 of tx
pin 10 ignition scence to 12v on both radios


then on the tx gm adjust the gain on the accessorie mic connection to suit audio qualatie

[m.meiberg]

Thanks for your answer,

How to make the hardware is not the problem, but the software (codeplug) is the problem, I can't get it to work.

Can you help me with two codeplugs for the gm series so I can get it to work?
(no problem is they are gm340, gm360 or 380; If I have a working set I can understand how to change them to the other ones)

[ghondie]

you should just be able to adjust the settings in the gp i/o box as i understand it. depends on your individual situation ie are you using 5 tone signalling or multiple pl tones etc?