GM380 TEST 2 FAILED

[sacaespinas]

Hi, I have a GM380 and programed a previusly saved codeplug. screen show message   TEST 8 FAILED.  I wrote other version of codeplug and now have the message:  TEST 2 FAILED. I used the tool codeplug Waris Us D02.05.06 View 06-Jul-2008 to program another codeplug which does not correspond to the version of my team. The data from my computer are:

  MODEL: MDM25KHN9AN8AE
  TANAPA: IMUD6024A
  SEE No.: R03.01.31

 Somebody can helpme with this problem?   Thanks a lot.

[sacaespinas]

 I have read in a document that the error is resolved by programming a correct codeplug. Anyone can upload to a server codeplug  of gm380 VHF 136-174 Mhz version?

MODEL: MDM25KHN9AN8AE
  TANAPA: IMUD6024A
  SEE No.: R03.01.31

[Sergio MD]

Try this:http://downloads.motorola-radio-support.co.uk/index.php?dir=Upload-Area/&file=IMUD6024A_MDM25KHN9AN8AE_R03.01.37.rar

[sacaespinas]

  Thanks, i try it tomorrow

[sacaespinas]

  Sergio, the radio works ok know, but cant read with CPS, have and error mesage that say its not the correct version of CPS.

[Sergio MD]

I hope you set regional code to MD?
And, if you don't save tuning data, you need completly realign you radio.

[sacaespinas]

 

I hope you set regional code to MD?

I changed no EMEA region and work ok, thanks

And, if you don't save tuning data, you need completly realign you radio.

Its needed realign the radio? Whats happed if dont do that?  Can programe softpost of other radio same model? Do you have softpost of GM380?

  Many thanks for your help.

[Sergio MD]

Tuning data is unical for each radio. Most of radio parametres is tuned with softpots.
You may destroy radio power amplifier if it don't tuned properly.
Tuning data file, saved with Tuner, locked on serial number.

[sacaespinas]

  Thanks Sergio, i think must go to tecnician.