GP380 cps locked

[Dragonbeast92]

Hi All,

I recently purchased a load of gp380's from ebay and have plugged them into my cps software only to find they are password protected. I was wondering if anyone could help with either telling me a way to crack or bypass it. Or if anyone could actually fix it for me. I have 5 in total that are password protected.

[bw18]

I think we should re-name the forum 'Motorola Radio Un-Locking Group' Really seems to be the fashion lately!

Dragonbeast92,

You can drop a new codeplug straight over the top of the existing codelug. What version of CPS are you using and what codeplug version is the radio(s) currently using? You can just try and find a matching codeplug in the archive of the CPS and try and overwrite the existing codeplug. This 'new' codeplug must be matching for your radios... type, frequency etc

BW

[Dragonbeast92]

hiya,

thanks for quick reply. i am running cps software of R3.11.15. the sw version on the radio is r03.09.07 which usually works fine as my other radios are on it and i can program freely as they were unlocked. on the radio is says cp is 6.00.

how would i go about looked for a codeplug to overwrite the radio with ??

[Dragonbeast92]

i have managed to do the radios with R6 but now i also have radios with 4 and i have tryed all the code plugs on my cps software and my other one. By any chance do you have one that i can use for the 4 ??

[radiobup]

Codeplug password protection could be on read access but also on write access too.

You have to use USB/Serial Port monitor to catch it or use Labtool to write default codeplug (have to match tanapa code from your radio)