gm350 flashing leds

[tony2404]

hi there i have a gm350 that i was programming when it decided to turn itself off, it now powers up with the red green and yellow leds on the front just flashing up and down and now wont do anything else or reprogram, any ideas what it could be or how to sort it

Ton

[Andreas GH]

Try to program it with a good codeplug again.
If you still have the problem,you must modify the RSS to get into the factory/lab mode.
You´ll find a new menu (service/program codeplug) after the modification.
Be careful:Use the lab mode only,with a good codeplug,read from your radio.I you use a codeplug from another radio,you have to retune it.
Look at my homepage for more information about it.

Andreas

[regvardy]

Hi Tony i have got 3 gm350's and i cant program them what software are you using?

Cheers
Dan

[tony2404]

hi Dan i am using just some software i got ages ago one of the gm350 cps is in a forieng language ( i know have spelt that  wrong lol) but you are welcome to it if it helps you can change it to english but takes a little figuring out

Tony

[regvardy]

hi tony what is your email address?

[tony2404]

Hi Dan my email is tony@hsa-group.co.uk

[regvardy]

did you get my email tony?