Problem with GM350

[Co-tec]

I programmed a GM350 today and something went wrong.
I added a scanlist and connected one of the buttons to start the scan.

When I pressed the button the scanning image showed on the screen. The current channelnummer is still visible, but the screen is litting/unlitting aprox. twice per second.

The radio doesn't respond to any keys, or pressing the PTT. It doesn't receive when i transmit from another radio.
If I disconnect and reconnect the power and the press the powerbutton, the radio starts doing the looping again.

I cannot get any contact with the programming interface.

Is there anything I can do to fix this?

[emsgeorge]

Send it the codeplug you saved before changing the settings.

Siwtch the radio on, and ignore what its doing - Ive had this thing before where Ive messed up on a gp360 (inhibited all channels !), then send it the codeplug again (the original one !).

Although the radio might not indicate its being programmed, it should allow you to have something squirted to it.

[Co-tec]

I have tried to ignore what the radio is doing and sending it the original codeplug, but i get a "no response from radio" message while trying to send the codeplug.

[Co-tec]

I let the radio sit without power for a couple of days, and when I turned it on it wasn't looping anymore.
The radio also responded to programming.

Problem solved. Thank you.